Part Number: 18-74806
HOSE ASSY 1/2"ID X 28" 5/8FMS X 5/8FMS
item weight 0.940 lbs
$58.38
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| 18-11012 | HOSE 3/4"ID X 4-3/4" 3 PLY SILICONE |
| 6933-71-5511 | TUBE CLAMP |
| 24-21202 | Element,Air Filter 10-15 PPI |
| 6150-41-5600 | CROSSHEAD |
| 24-51201 | Fuel Filter 15 Micron L-M-NL944 & T (12ea Per Case) |
| 24-01201 | Oil Filter L-M-NL944 Tier 2 & 3 (12ea Per Case) |
| 12-00050 | CS,HX HD M10x1.5 X 85mm |
| RE522076 | THERMOSTAT 180F/82C |
| 06030-06307 | BEARING |
| MD070717 | INJECTION WASHER M944 |
| 6152-11-6120 | MANIFOLD |
| 07005-00812 | SEALING WASHER,BONDED M8 |
| R26905 | HOSE 3/4"ID X 2-1/2" 3 PLY SILICONE |
| 21-00530 | PLUG,HX HD,BRS. 1/2NPT |
| 12-00311 | CS,HX HD 3/8-16 X 3/4" Grade 5 |
| 33-81012 | Hydrolastic Mount 400LBS |
| 33-81014 | Hydrolastic Mount 600LBS |
| 01011-81055 | CS,HX HD M10x1.5 X 155mm |
| R54826 | HOSE, OIL COOLER 90 DEG 3/4"ID MOLDED |
| R54829 | HOSE |
| 18-21614 | Hose 2"ID X 2-1/2" 4-Ply Silicone |
| 25-14804 | CAM,RAW WATER PUMP |
| 07005-01012 | SEALING WASHER,BONDED M10 |
| 25-14818 | END COVER,RAW WATER PUMP "LUGGER/NORTHERN LIGHTS" (117mm OD W/ 5 HOLES) |
| 28-11603 | 5" Heat Exchanger End Cover Assembly Upgrade Kit - see Application Comments |
| 24-02002 | Oil Filter M-NL753 - 773L - 843N - 844 - 844L - 844T4 & M864 (Case Qty = 12ea) see Application Comments |
| 14H826 | HEX NUT 1/2-13 (THIN) |
| 6151-71-5330 | PIPE |
| 14-00212 | HEX NUT,NYLOCK 5/16-18 |
| H35244 | O-RING |
| 18-11907 | HOSE 1-1/4"ID X 15" WIRE REINFORCED |
| 12-00812 | CS,HX HD M10x1.5 X 40mm |
| 12-00814 | CS,HX HD M10x1.5 X 35mm |
| 12-11003 | CS,HX HD 5/16-18 X 7/8" |
| 00-74841 | PLUG,TACHOMETER DRIVE 1/4NPT FEMALE |
| 15-00211 | FLAT WASHER 5/16" USS |
| 11-31615 | Gasket,Turbocharger / Exhaust Outlet Mtg |
| 07000-13025 | 0-RING |
| 6151-71-3150 | SEAL |
| 129470-42532 | IMPELLER (EPP) |
| 18-52702 | HOSE 3/8"ID X 24" PUSH-ON |
| 24-03100 | Oil Filter M-NL773L - 843N - 844 - 844L (12 PER CASE) |
| 18-14800 | HOSE 7/8"ID X 3-1/2" 3 PLY SILICONE |
| 18-14804 | HOSE 3/8"ID X 42"POLYVINYL |
| 18-14807 | HOSE 2-5/8"ID X 3" 3 PLY SILICONE |
| 18-14808 | HOSE 2-7/8"ID X 4" 3 PLY SILICONE |
| 31B6110100 | SEALING WASHER, WITH BLEED HOLES |
| R73521 | GASKET,ROCKER ARM COVER MTG. |
| 40-44802 | Drive Belt Set 11/16" X 59-3/8" |
| 14-00817 | Hex Nut M10x1.5 S/S (316) (17mm Hex) DIN Code 934-A4 |
| 18-12501 | HOSE 3/4"ID X 3" 3 PLY SILICONE |
| 18-12509 | HOSE 1-5/8"ID X 6" 3 PLY SILICONE |
| 20-12012 | Gasket 3" Rubber - Heat Exchanger End Cover Seal |
| 6150-51-1710 | RING |
| 6150-51-1720 | RING |
| 15-00701 | Flat Washer M8 DIN Code 125-A |
| 18-05000 | HOSE 7/8"ID X 2-3/4" 3 PLY SILICONE |
| 21-62507 | M.EL.90,STL. 1/2NPT X 5/8-37T |
| 21-62510 | M.CONN.STL. 1/2NPT X 5/8-37T |
| 18-00003 | HOSE 3/8"ID X 32" PUSH-ON |
| R66177 | GEAR, OIL PUMP |
| 15-00804 | WAVE WASHER M10 DIN CODE 137-B |
| 15-00805 | Flat Washer M10 DIN Code 125-A |
| 10-14802 | TEE,COOLANT MANIFOLD |
| 19-00004 | Hose Clamp #4 S/S |
| 19-00012 | Hose Clamp #12 S/S |
| 6141-64-7270 | HOSE |
| 19-00032 | Hose Clamp #32 S/S |
| 19-00036 | Hose Clamp #36 S/S |
| 12-34800 | CS,HX HD M10x1.5 X 160mm GRADE 10.9 DIN CODE 931-10-ZP |
| 24-52020 | Fuel Filter 4 Micron (Case Qty = 12ea) |
| DZ100555 | THERMOSTAT 180F/82C |
| 16-01000 | O-Ring 3/4"ID X 3/32" Nitrile |
| 6210-71-1160 | GASKET |
| R28811 | FLYWHEEL RING GEAR SAE#11-1/2 & SAE#14 (129 TEETH) |
| R26286 | O-RING 0.414"ID X 0.072" 90 DUROMETER NITRILE (SAE J515 TYPE CH) |
| 21-10007 | Filler Cap 7PSI Single Seal or Double Seal - Open System Type |
| R81989 | SLEEVE |
| 6150-11-6111 | COOLANT MANIFOLD (2 PORT) |
| 18-00753 | Hose 3/4"ID X 2-1/4" 3-Ply Silicone |
| 18-21014 | Hose 2"ID X 2-3/8" 3-Ply Silicone |
| AR85788 | SHAFT, OIL PUMP |
| R56814 | O-RING |
| R56815 | O-RING (RED) |
| R79605 | SLEEVE |
| 22-75007 | Thermocouple Type "K" with 1/4NPT X 1/4" Compression Fitting - see Application Comments |
| 16-25002 | O-RING 84.6mmID X 5.7mm FLUOROCARBON (VITON) |
| R98487 | GASKET |
| 6222-61-6240 | O-RING A/C |
| R98486 | GASKET, OIL COOLER |
| 23-11007 | BRACKET,PUMP RESTRAINT MTG. |
| 23-11609 | Bracket,Raw Water Pump Restraint |
| 25-15706 | Wear Plate |
| 24-54808 | FUEL FILTER 6108/6125 (12 PER CASE) |
| 13-11001 | STUD 5/16-18 X 5/16-18 X 1-1/2" Grade 8 |
| 40-05404 | Drive Belt 1/2" X 46-3/8" |
| 6212-65-2610 | THERMOSTAT 185F/85C (ENGINE OIL COOLER) |
| 21-55707 | BANJO BOLT,LEAK INDICATOR TYPE 1/8BSPP |
| 6210-11-8141 | GROMMET, 6140 VALVE COVER |
| 15-00801 | LOCK WASHER,HI-COLLAR M10 S/S (316) DIN CODE 7980-A4 |
| 6151-31-8300 | CRANKSHAFT DAMPER,VISCOUS |
| 21-00038 | HEX NIPPLE,STL. 1/2NPT |
| 36-70006 | Ball Valve,Brass 1/2NPT Female |
| DK150645-6800 | CONNECTOR,FUEL INLET 14MM |
| 6215-15-4710 | GASKET,AFTERCOOLER COVER 6140 |
| 6212-11-4721 | GASKET, INTAKE CONNECTOR (HIGH PROFILE ONLY) |
| 6212-61-6661 | GASKET |
| 34-14803 | Pulley 2-A/B X 6-3/4" |
| 34-14804 | BUSHING,1" "TRANTORQUE" TAPERED LOCKING TYPE |
| 6212-61-6431 | O-RING |
| 27-01601 | TUBE ASSY,TURBO OIL SUPPLY M668 WITH SINGLE VERTICAL OIL FILTER |
| 37-16801 | Flow Switch,Bronze 10 GPM 2"NPT Female Ports |
| 37-16802 | Flow Switch,Bronze 25 GPM 2"NPT |
| 24-20016 | Element, Crankase Breather Filter (High restriction, High density ) CCV4500 |
| 07000-12125 | O-RING |
| 25-11063 | Raw Water Pump (with Lugger - NL Logo / Mechanical Shaft Seal) |
| 80374 | Ball Bearing 30mmID X 55mmOD X 13mm Single Row Deep Groove Unsealed |