Part Number: 2040V30
Element 30 Micron with Seals---Turbine 900 Series
item weight .420 lbs
$19.78
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| 18-59513 | Hose Assy 1/4"ID X 13" 8mm90 DKO Swivel X 3/8FMS S/S-TFE |
| 21-71043 | M.EL.90,BRS. 1/8NPT X 1/4-45T |
| 21-71044 | M.EL.90,BRS. 1/4NPT X 1/4-45T |
| R119874 | BUSHING |
| 21-71045 | F.SWIVEL,BRS. 1/4-45T X 1/4HB (Push-On) (Universal Seat) |
| R51936 | SEALING SLEEVE 1/4"OD TUBE (White Stripe) |
| 24-01201 | Oil Filter L-M-NL944 Tier 2 & 3 (12ea Per Case) |
| R133758 | HOSE,OIL FILL CONNECTION |
| T19044 | OIL FILTER |
| 25-12059 | SHAFT,RAW WATER PUMP |
| 25-12060 | Impeller Kit with Gasket & O-Ring Seals (6 PER CASE) |
| 25-12062 | WEAR PLATE,RAW WATER PUMP |
| 25-12064 | BEARING,RAW WATER PUMP |
| 25-12065 | SEAL,LIP TYPE |
| 25-12066 | SEAL ASSY,MECHANICAL (GREEN) (12 PER CASE) |
| 25-12067 | O-Ring 2-3/8"ID X 1/16" Nitrile |
| 25-12068 | SNAP RING,RAW WATER PUMP |
| 25-12069 | SNAP RING,RAW WATER PUMP |
| 24-09501 | Oil Filter 1064 & 1066 (6ea Per Case) |
| R504734 | O-Ring 1-1/2"ID X 1/8" 60 Durometer Nitrile |
| 25-14817 | Wear Plate |
| 25-15003 | Impeller Kit with Spline Seal & End Cover Gasket / O-Rings |
| 25-15010 | Cam |
| RE531334 | SLEEVE ASSY |
| 00-39602 | Lagging Set,Exhaust manifold with Dry Adapter for Turbo Mtg (Grey Silicone - 7-Piece) M1066H |
| 25-19729 | End Cover,Raw Water Pump "LUGGER / NORTHERN LIGHTS" |
| 13-00814 | Stud M10x1.5 X 30mm (42mm LOA) Grade 10.9 DIN Code 939-10 |
| 600-411-1151 | CORROSION RESISTOR 500 HR |
| T20168 | WASHER |
| 15-00402 | LOCK WASHER,HELICAL 7/16 |
| 24-21000 | Air Filter 8"OD X 8-3/4" (10-3/4"LOA)- 4-1/8"OD X 2" Outlet |
| R528387 | CAPSCREW HEX HEAD FLANGED 1/2-13 X 3-3/4" SPECIAL |
| 14-00817 | Hex Nut M10x1.5 S/S (316) (17mm Hex) DIN Code 934-A4 |
| 15-00804 | WAVE WASHER M10 DIN CODE 137-B |
| R534091 | CAPSCREW HEX HEAD FLANGED 1/2-13 X 5.43" SPECIAL |
| 11-30013 | Gasket,Exhaust Manifold Adapter Mtg |
| 24-52020 | Fuel Filter 4 Micron (Case Qty = 12ea) |
| 24-51008 | Element,Fuel filter 2 Micron with Plastic Drain Valve 6" L-M1066H HPCR System |
| 24-51012 | Element,Fuel Filter 5 Micron 6" with Plastic Drain Valve L1066A - M1066A2-A3 VP44 System |
| 16-01000 | O-Ring 3/4"ID X 3/32" Nitrile |
| 11-15001 | GASKET,COOLANT OUTLET TO H.E. |
| 21-10001 | Drain Cock,Brass 1/8NPT (Counterclockwise-to-Open) |
| 24-20029 | Element, Crankase Breather Filter (Low restriction, Aluminum Open ) CCV4500 |
| DZ120069 | FUEL LIFT PUMP ASSY (W/O FITTINGS) 1064-1066 HPCR SYSTEMS |
| 2020V10 | ELEMENT 10 MICRON WITH SEALS - TURBINE 1000 SERIES |
| 2020V30 | Element 30 Micron with Seals---Turbine 1000 Series |
| 16-14804 | O-Ring 2"ID X 1/8" Nitrile |
| 25-15703 | Cam (with Screw) |
| 25-15705 | End Cover,Raw Water Pump 4-Hole "Lugger / Northern Lights" (127mmOD) |
| 25-15706 | Wear Plate |
| DZ118286 | OIL FILTER NL445-668 POWERTECH |
| 25-15049 | O-Ring 24.5mmID X 3mm |
| 16-19502 | O-Ring 7/16"ID X 3/16" Nitrile |
| R116516 | HEAD GASKET 668 POWERTECH |
| 16-09503 | O-Ring 15.3mmID X 2.2mm 90 Durometer Nitrile (ISO 6149 Port) |
| R500271 | O-Ring 8.1mmID X 1.6mm 90 Durometer Nitrile (ISO 6149 Port) |
| R123593 | NUT |
| 51M7040 | O-RING 9.3mmID X 2.2mm 90 DUROMETER NITRILE (ISO 6149 PORT) |
| T122075 | O-RING 1-3/8" X 3/32" NITRILE |
| 24-08001 | Oil Filter M673 NL643 673 673L (12ea per Case) |
| R501124 | BOLT, CONNECTING ROD |
| 13-00816 | STUD M10x1.5 X 50mm (62mm LOA) Grade 8.8 DIN Code 939-8 |
| 27-09501 | Connector,Raw Water Pump Outlet |
| 27-09502 | Connector,Aftercooler Outlet |
| 24-26808 | OIL SEPARATOR ELEMENT (MARKED 40-1009 - For filter assemblies 24-26807 & 24-26809 with separate vacuum regulator)) |
| 16-09601 | O-RING 17"ID X 1/8" VITON |
| 19-01032 | Hose Clamp #32 Extended Band S/S (316) 1-9/16" Min X 2-1/2" Max |
| 25-19521 | SEAL,LIP TYPE OIL VITON |
| 11-39502 | Gasket,Coolant Port Adapter Mtg |
| 19M7865 | CS,HX HD FLANGED M8x1.25 X 16mm GRADE 10.9 DIN CODE 6921-10ZY |
| R116830 | GASKET,AFTERCOOLER |
| 25-19716 | O-Ring 3-3/8"ID X 1/8" Viton |
| RE509031 | ELEMENT,FUEL FILTER 2 MICRON 4.3" WITH PLASTIC DRAIN VALVE M1064T2 & L-M1066T DE10, M1064H |
| 27-19517 | Tube,Flow Switch Inlet S/S 2"HB X 9-1/2" (1-7/64" Offset S-Bend) |