Part Number: DZ104958
INJECTION LINE #1 & #2 HPCR SYSTEM
item weight 0.180 lbs
$72.81
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| RE507540 | INJECTION LINE #3 & #4 HPCR SYSTEM |
| R121043 | VALVE,OIL BYPASS |
| R517471 | TIMING WHEEL (STEEL) |
| R119874 | BUSHING |
| R51936 | SEALING SLEEVE 1/4"OD TUBE (White Stripe) |
| RE516228 | PISTON & LINER KIT (Piston Marked RE507758) |
| R502755 | PISTON PIN |
| RE500608 | CONNECTING ROD ASSY 4.5 / 6.8 |
| RE519115 | VALVE GUIDE SEAL,INTAKE & EXHAUST |
| RE505941 | CRANKSHAFT PULLEY/DAMPER 188mmOD |
| R505452 | O-RING,FUEL INJECTOR SEAL |
| R65397 | O-RING 1/2"ID X 3/32" VITON |
| 24-09501 | Oil Filter 1064 & 1066 (6ea Per Case) |
| RE516486 | VALVE SPRING KIT |
| R515044 | NUT,INJECTION LINE CONNECTION |
| R116031 | O-RING |
| R504734 | O-Ring 1-1/2"ID X 1/8" 60 Durometer Nitrile |
| 11-31011 | Gasket,Exhaust Outlet |
| 21-31005 | M.EL.90, 1"NPT X 1-5/8"HB |
| 35-12500 | Thermostat 169F / 76C 52mm OD S/S (Rubber Poppet Seat) |
| RE522594 | TUBE |
| R504781 | CAP SCREW M8 X 1.25 X 35MM |
| R63185 | O-RING |
| 36-71002 | Shut-Off Valve,Brass 3/8NPT X 1/2-45T |
| 24-21000 | Air Filter 8"OD X 8-3/4" (10-3/4"LOA)- 4-1/8"OD X 2" Outlet |
| RE546906 | COOLANT PUMP,CAST IRON (HIGH FLOW) 668 - 1064H - 1066 |
| RE557890 | INTAKE VALVE SERVICE KIT,STD 1064 -1066 4V (See contents list in Application Comments) |
| RE557891 | EXHAUST VALVE SERVICE KIT,STD 1064 -1066 4V (See contents list in Application Comments) |
| RE553420 | CYLINDER HEAD ASSY WITH VALVES 1064 4V |
| R534091 | CAPSCREW HEX HEAD FLANGED 1/2-13 X 5.43" SPECIAL |
| 35-11000 | Thermostat 180F / 82C 52mm OD S/S (Rubber Poppet Seat) |
| 18-61002 | Hose Assy 1/2"ID X 21" 1/2FMS X 1/2FMS |
| 24-51008 | Element,Fuel filter 2 Micron with Plastic Drain Valve 6" L-M1066H HPCR System |
| 24-51009 | Element,Water Separator 30 Micron Reverse Flow 6" with Plastic Drain Valve L-M1066H & NL1066H4 HPCR System |
| 16-01000 | O-Ring 3/4"ID X 3/32" Nitrile |
| R545883 | GASKET,TIMING COVER 4.5 & 6.8 4V |
| R54114 | SNAP RING 1.80"OD (FREE) X 0.062" |
| DZ104989 | FUEL LINE, HP FUEL SUPPLY LINE 1 PU |
| 22-40201 | SENDER,PRESSURE 0-150 PSI,ISO GROUND 1/8NPT (MARKED 32/14) |
| DZ110616 | FUEL LIFT PUMP ASSY (W/O FITTINGS) 1064-1066 HPCR SYSTEMS |
| DZ104957 | INJECTION LINE #3 & #4 HPCR SYSTEM |
| 24-20029 | Element, Crankase Breather Filter (Low restriction, Aluminum Open ) CCV4500 |
| DZ108165 | TURBOCHARGER, 24V |
| 16-10001 | O-RING 3"ID X 1/8" VITON |
| 15-55701 | SEALING WASHER,BONDED 1/8BSPP |
| 22-40236 | Switch,Pressure 15PSI,N.C. 1/8NPT Isolated Ground |
| R111137 | SPRING |
| 24-51006 | Metal Valve,Marine Fuel Filter Drain - USCG |
| R120467 | Elbow 90 Degree 3/4"HB (w/o O-Ring) Vent Outlet |
| 16-19503 | O-Ring 4-1/4"ID X 3/32" Nitrile |
| R97185 | O-RING 5/8"ID X 1/8" NITRILE |
| R47154 | O-RING |
| 21-79603 | M.EL.90,STL. M18x1.5 X 1/2-37T (ISO 9974-1 PORT) |
| R123437 | Drive Belt,Poly-V 28mm X 1545mm |
| RE65908 | ROD BEARING,STD |
| R123471 | HOUSING |
| RE65165 | MAIN BEARING KIT,STD |
| RE65168 | THRUST BEARING KIT,STD |
| 22-40440 | Kit,Speed Sensor 3/4-16 X 2-1/4" & Plug-in Pigtail Harness with Metri-Pak 150.2 Connector |
| RE505501 | VALVE,OIL PRESSURE REGULATING |
| R501124 | BOLT, CONNECTING ROD |
| 25-19519 | Raw Water Pump |
| 29-09602 | Gasket Set,Engine Overhaul L-M1066H (Non-Returnable If Opened) |
| RE516540 | FUEL INJECTOR,ELECTRONIC UNIT TYPE M1064H @ 1800RPM & NL1064H2 ALL(CORE CREDIT $75.00) |