Part Number: DZ119059
Drive Belt,Poly-V 28mm X 1515mm
item weight .420 lbs
$87.66
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| 24-09501 | Oil Filter 1064 & 1066 (6ea Per Case) |
| RE521540 | Element,Fuel Filter / Water Separator 10-Micron |
| 22-40938 | Switch,Temperature 210F N.O./ N.C Isolated Ground 3/8NPT |
| RE43593 | FILLER CAP 10 PSI |
| 22-41016 | Sender,Pressure 0-80 PSI Standard Ground 1/8NPT |
| 22-41079 | Solenoid 24VDC 85A N.O. Isolated Ground |
| RE521538 | Element,Fuel Filter 2-Micron see Application Comments |
| AR48675 | THERMOSTAT 180F/82C |
| 22-40536 | Switch,Pressure 9PSI N.O./ N.C. Isolated Ground 1/8NPT |
| RE526661 | IMPELLER KIT |
| RE522794 | SENSOR,FUEL PRESSURE |
| 22-40963 | Switch,Pressure 15PSI N.O./ N.C. 1/8NPT 10A Contacts |
| AT183451 | FILLER CAP 16 PSI |
| 22-40943 | Switch,Temperature 205F N.O./ N.C. Isolated Ground 3/8NPT 3ea #8-32 Terminals |
| 24-20027 | Air Filter 8-1/2"OD X 6-3/8"LOA X 3"ID Outlet |
| RE540391 | RAW WATER PUMP REPAIR KIT - MAJOR SERVICE (FOR PUMP RE538663) |
| RE553368 | Primary Fuel Filter / Water Separator Assy with 10-Micron Element & Integral 24VDC Pump with Harness |
| RE557215 | THERMOSTAT |
| 22-41445 | STARTER KIT 24V 4.5 KW ISOLATED GROUND (13 tooth pinion) |
| 25-11011 | Impeller Kit (Includes Cover Gaskets & O-Ring) |
| 25-11017 | GASKET,RAW WATER PUMP COVER |
| 22-40981 | Switch,Temperature 215F N.O./ N.C. Isolated Ground 3/8NPT |
| 24-29401 | Air Filter Element (Cleanable) |
| RE525016 | THERMOCOUPLE,INTAKE AIR TEMPERATURE M14x1.5 Probe Length = 33mm Metri-Pak 150.2 Connector |
| DZ100217 | FUEL INJECTOR HPCR |
| DZ100211 | FUEL INJECTOR M65C13 - M65T13 |
| RE537639 | SENSOR,INTAKE MANIFOLD AIR PRESSURE |
| 22-40710 | Relay SPDT 24VDC 20A (Suppression w/ Resistor) |
| 22-42802 | Sender,Temperature 250F Isolated Ground 1/2NPT |
| DZ111858 | DRAIN VALVE |
| DZ114697 | RAW WATER PUMP ASSEMBLY |
| DZ116559 | RAW WATER PUMP |
| DZ120069 | FUEL LIFT PUMP ASSY (W/O FITTINGS) 1064-1066 HPCR SYSTEMS |
| DZ118764 | Drive Belt,Poly-V 28mm X 1525mm |
| DZ120267 | Sensor |
| 25-15036 | SEAL ASSEMBLY |
| R108730 | GASKET,THERMOSTAT HOUSING |
| 22-40357 | Switch,Pressure 25PSI N.O./ N.C. 10A Contacts 1/8NPT |
| R501428 | GASKET,OIL COOLER COVER |
| 24-20016 | Element, Crankcase Breather Filter (High restriction, High density ) CCV4500 |
| RE501150 | Starter 24V 7.5kW Standard Ground L.H. 3-Bolt SAE Type #1 Mount |
| R123501 | GASKET,OIL COOLER |
| T122075 | O-RING 1-3/8" X 3/32" NITRILE |
| 22-40914 | Switch,Temperature 240F N.O./ N.C. Isolated Ground 3/8NPT |
| RE49896 | IMPELLER SVC KIT M65C13 - M99C13 - MP150C / M175C2 |
| RE54993 | PLUG & ZINC ASSY |
| RE167207 | SENSOR,OIL & FUEL PRESSURE |
| RE52722 | SENSOR,COOLANT TEMPERATURE M14x1.5 - Probe = 7.8mmOD x 14mm (from thread stop) Metri-Pak 150.2 Connector - see Application Comments |
| RE519144 | Speed Sensor M20x1.5 X 36mm Probe Length (Metri-Pak 150.2 Connector) |
| RE522766 | Crankcase Breather Assembly 3cfm to 6cfm 12"H2O Max Restriction |