Part Number: 19-55702
CLAMP ASSY, 1 LINE
item weight .420 lbs
$40.50
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| 19-59602 | CLAMP ASSY,2 LINES |
| 07005-00812 | SEALING WASHER,BONDED M8 |
| 19-31401 | V-Clamp (K26 Pattern Flange) |
| 11-31012 | Gasket,Turbo Oil Return |
| 11-31031 | Gasket,Turbo Oil Return |
| 07005-01012 | SEALING WASHER,BONDED M10 |
| 6211-61-1533 | SEAL |
| 16-14802 | O-RING 5-3/4"ID X 1/4" NITRILE |
| 19-72251 | Adelle Clamp 1/4"ID X 3/8" Stud |
| ND093175-2310 | SHIM,1.65mm |
| 6151-71-5370 | CLIP ASSY. |
| 07005-01412 | SEALING WASHER,BONDED M14 |
| 07206-11014 | BANJO BOLT M14x1.5 X 25mm |
| ND093175-2300 | SHIM |
| ND093175-2290 | SHIM |
| 18-05000 | HOSE 7/8"ID X 2-3/4" 3 PLY SILICONE |
| 145536340 | HOSE 1"ID MOLDED |
| 37-41003 | Bulb, Red 24VDC Type D / T1-1/2 Wedge Based Peanut |
| 16-13101 | O-Ring 2-1/2"ID X 1/8" Nitrile |
| 11-35700 | GASKET,EXHAUST MANIFOLD |
| 6136-11-8814 | GASKET,ROCKER ARM COVER |
| 40-05701 | DRIVE BELT SET 3/8" X 54-1/8" (2ea) |
| 29-05700 | GASKET KIT,CYLINDER HEAD L-M6108 |
| 29-05710 | GASKET KIT,CYLINDER BLOCK L-M6108 |
| 6221-11-3880 | GASKET,INJECTOR SEATING 4.9mm THICK 6108-2 |
| 25-15703 | Cam (with Screw) |
| 25-15704 | Impeller Kit with Cover O-Ring Seal |
| 25-15706 | Wear Plate |
| 25-15707 | Shaft,Raw Water Pump (A-Spline / 9-Tooth Involute) |
| 25-15712 | O-Ring 2-1/4"ID X 3/32" Nitrile |
| 25-15715 | Snap Ring,Internal |
| 25-15716 | Snap Ring,External |
| ND090222-0070 | SEALING WASHER,BONDED M14 |
| 6221-11-4810 | GASKET |
| 16-00004 | O-Ring 3-1/4"ID X 1/8" Nitrile 70 Durometer |
| 600-815-2770 | GLOW PLUG 24V L-M6108 |
| 6136-61-1130 | SNAP RING,CIRC.PUMP 6108A |
| 6136-61-1120 | COVER,CIRC.PUMP L6108A |
| 06037-06304 | BEARING,COOLANT PUMP |
| 24-14802 | CORROSION RESISTOR 6108 & 6125 (12 PER CASE) |
| 15-55701 | SEALING WASHER,BONDED 1/8BSPP |
| 16-55701 | O-Ring 13.1mmID x 1.6mm |
| 6136-61-1190 | SNAP RING |
| 6136-61-2170 | VALVE |
| 600-311-7520 | VENT PLUG L-M6108 FUEL FILTER |
| 25-15723 | Spacer,Shaft Seal - see Application Comments |
| 9111241 | Ball Bearing 60mmID X 130mmOD X 31mm Single Row Deep Groove Double Shields |
| 27-15721 | TUBE ASSY,COOLANT VENT |
| 22-70066 | Timer Module 24VDC 0-20 Seconds |
| 04064-03515 | SNAP-RING |
| 06000-06907 | BEARING |
| 07000-72100 | O-RING |
| 16-19502 | O-Ring 7/16"ID X 3/16" Nitrile |
| 06000-06308 | BALL BEARING |
| 07000-12018 | O-RING |
| 11-35705 | GASKET,EXHAUST WITH INSTALLED O-RING |
| 6136-61-2160 | SPRING |
| 18-55704 | HOSE ASSY 1/4"ID X 20" 8mm STANDPIPE X 8mm STANDPIPE LIGHT SERIES |
| 19-55701 | Clamp Assy 2-Lines |
| 07000-73022 | O-RING |
| 25-11058 | O-RING |
| 25-11059 | BEARING |
| 19-50012 | CLAMP ASSY,2 LINES |
| 19-50014 | CLAMP ASSY,4 LINES |
| ND092100-2491 | FUEL LIFT PUMP ASSY. 6108T2 & A2 |
| 16-09401 | O-RING 12"ID X 1/8" VITON |
| 6222-55-1660 | RETAINER |
| 6222-55-1640 | VALVE |
| 6222-55-1650 | SPRING |