Part Number: 21-59517

Banjo Bolt 1/8BSPP X 3/4"

item weight 0.040 lbs

$61.51


Items Often Purchased with this Item:

Part NumberDescription
27-59512 Double Wall Injection Line #1 & #2 HPCR (Marked #1)
27-59534 Double Wall Injection Line #3 & #4 HPCR (Marked #2)
27-59656 Double Wall Injection Line #5 & #6 HPCR (MARKED #3) HPCR
27-59504 Tube Assy,HPCR Manifold Inlet #1 Double Wall (Marked #4)
27-59505 Tube Assy,HPCR Manifold Inlet #2 Double Wall (Marked #5)
27-59620 Tube,Fuel Return-to-Alarm Tank
21-59518 Banjo Bolt,Double Length 1/8BSPP X 1-1/4"
27-59507 Tube,Fuel Return to Alarm Tank,Lower
27-59508 Tube,Fuel Return to Alarm Tank
27-59509 TUBE,FUEL RETURN TO ALARM TANK 1/8BSPP BANJO X 6mm STANDPIPE
22-49509 Engine Wire Harness CAN-BUS & HPCR Controller M1064H - M1066H
R51936 SEALING SLEEVE 1/4"OD TUBE
R505452 O-RING,FUEL INJECTOR SEAL
R515535 SEALING WASHER,FUEL INJECTOR
R65397 O-RING 1/2"ID X 3/32" VITON
22-40904 Switch,Temperature 205F N.O./ N.C. Isolated Ground 1/2NPT
24-21000 Air Filter 8"OD X 8-3/4" (10-3/4"LOA)- 4-1/8"OD X 2" Outlet
22-40085 Relay SPDT 24VDC 20A
21-10000 PLUG,HX HD,BRS.1/2NPT x 7/16-14 (ZINC HOLDER)
21-10010 Zinc Anode 5/8"OD X 2" X 7/16-14 Thread
16-15006 O-Ring 1-1/8"ID X 3/16" Nitrile
25-15703 Cam (with Screw)
25-15705 End Cover,Raw Water Pump 4-Hole "Lugger / Northern Lights" (127mmOD)
25-15706 Wear Plate
25-15716 Snap Ring,External
15-55701 SEALING WASHER,BONDED 1/8BSPP
21-00056 F.ADAPTER,STL. 1/4NPT X M14x1.5 (1-3/8"LOA)
22-40277 Alternator 24V/75A Isolated Ground Large Frame (with Adjustable Regulator)
22-40357 Switch,Pressure 25PSI N.O./ N.C. 10A Contacts 1/8NPT
21-09702 M.CONN.BRS. 1/4NPT X 3/8" Tube Comp (5/8-24 Vibra-Lok Body Only)
25-19526 Shaft Seal (Carbon / Ceramic)
RE61812 SENSOR,AIR INLET TEMPERATURE M14x1.5 - Probe = 7.8mmOD x 14mm (from thread stop) Metri-Pak 150.2 Connector -see Application Comments
RE519144 Speed Sensor M20x1.5 X 36mm Probe Length (Metri-Pak 150.2 Connector)
21-59514 REDUCING UNION,STL. 8mm X 6mm COMP (SERIES L) WITH NUTS & SLEEVES